Stiffer Detent Mod

This mod is for people who Use halos and have a problem with it double feeding on their Impulse or Shocker.

First Remove your Detents from your gun

Next, using a 1/8’’ allen wrench, Push it in the hole of the detent and push down into it until the little white ball pops out.

Next, find a Spring from a “clicky” pen and cut about 3 coils off of it

Then put those 3 or so coils in the detent w/ the spring that’s already in the detent

Finally, You have to put the little ball back into the Detent. I prefer to set it on the detent, then using a pair of pliers, squeeze it in. It might be a little challenging at first, but you will get it

I am not responsible if you damage yourself or your gun/parts from attempting this mod.

Warning: some of the newer detents don’t allow you to do this, so don’t force it if it won’t come out